For more than a decade, Termidor® SC termiticide/insecticide and
Termidor® 80 WG termiticide/insecticide have set the standard for
termite control efficacy. Now, Termidor HE High-Efficiency
Termiticide redefines termiticide application precision, volume,
labor and time. New molecular technology, Termidor® HE Technology,
creates an Enhanced Protection Zone using less water, smaller
trenches, wider drill hole and rod spacing, and shallower treatment
depths.
For pest management professionals, this means increased
profitability through improved productivity, more efficient use of
equipment and resources, and better business flexibility.
NOT FOR SALE IN: CA, NON US
LOCATIONS
To apply Termidor HE, you will need either a handheld pump
sprayer, a backpack sprayer, or a spray rig for large volume
applications. For use as a termite trench treatment, you will need
a pickaxe or shovel to dig the trench, and a bucket with at least a
3 gallon capacity to mix and apply the Termidor.
First, you will need to determine how much Termidor HE you will
need for your application. Measure your treatment area in square
feet. You can find your treatment area’s size by measuring its
length and width in feet, and then multiplying the results together
(length x width = square feet). For termite trenching, measure the
perimeter of the structure in feet. Termidor HE can be mixed
between 0.8 fluid ounces per gallon of water to 1.6 fluid ounces
per gallon of water depending on the desired dilution ratio. For
most applications, use 1.6 fluid ounces of Termidor HE per gallon
of water for a 0.125% dilution. For termite trenching, you will
need 2 gallons of Termidor dilution to treat 10 linear feet.
For termite trenching applications, mix 1.6 fluid ounces of
Termidor HE per gallon of water in a bucket up to 2 gallons. It is
easier to use a 3 gallon bucket so that it will not be filled to
the brim and willl help prevent spilling. To create a 2 gallon
solution, you will need 3.2 fl. oz. of Termidor (1.6 fl. oz per
gallon of water).
For termite trenching applications, dig a trench around the
structure’s perimeter 4 inches wide and 2 inches deep. Hang on to
the displaced soil as it will be used to backfill the trench after
application. Because you will be applying 4 gallons of Termidor
solution per 10 linear feet, it is helpful to create a dam with the
soil every 10 feet of trench to section off each 10 foot stretch.
Pour your finished Termidor solution in each 10 foot stretch. Then
backfill by replacing the displaced soil. Be sure to pack the soil
down for adequate distribution.
Termidor HE can be used to treat pre and post-construction of
commercial, industrial, institutional, and residential structures
and utility enclosures. It can be used on exterior surfaces, in
voids, exterior crawl spaces, perimeter trenches, and under
concrete slabs.
Use Termidor HE for both treatment and prevention of termites.
Apply Termidor HE on calm days when rain is not in the immediate
forecast. Do not treat water-saturated or frozen soil.
Termidor HE is safe to use around pets and children when applied
according to label directions. Everyone should be kept off the
treated area until it is completely dry. Always wear proper
personal protective equipment (PPE) when applying.
It is important to properly identify the targeted termite
species. Termidor HE is labelled for a variety of termites, but is
not labelled to control Formosan termites.
refer to the Product Label for complete instructions including
mixing rates and application techniques.
PestManagementSupply