Regular Price: $756.00

Special Price $580.00

The most effective termiticide is now the most efficienttoo!

For more than a decade, Termidor® SC termiticide/insecticide andTermidor® 80 WG termiticide/insecticide have set the standard fortermite control efficacy. Now, Termidor HE High-EfficiencyTermiticide redefines termiticide application precision, volume,labor and time. New molecular technology, Termidor® HE Technology,creates an Enhanced Protection Zone using less water, smallertrenches, wider drill hole and rod spacing, and shallower treatmentdepths.

For pest management professionals, this means increasedprofitability through improved productivity, more efficient use ofequipment and resources, and better business flexibility.


Case Qty 2 / CASE
Manufacturer BASF PEST CONTROL SOLUTIONS [view products, website]
Dimensions DIAMETER - 2 1/2" LENGTH - 3"
EPA# 7969-329
Active Ingredient Fipronil 8.73%
SDS bas59012839_termidor_he_sds_05172019.pdf
Size DIAMETER - 2 1/2" LENGTH - 3"
Pet Safe Yes, if followed as directed on label.
Formulation Professional Product

To apply Termidor HE, you will need either a handheld pump sprayer, a backpack sprayer, or a spray rig for large volume applications. For use as a termite trench treatment, you will need a pickaxe or shovel to dig the trench, and a bucket with at least a 3 gallon capacity to mix and apply the Termidor.

First, you will need to determine how much Termidor HE you will need for your application. Measure your treatment area in square feet. You can find your treatment area’s size by measuring its length and width in feet, and then multiplying the results together (length x width = square feet). For termite trenching, measure the perimeter of the structure in feet. Termidor HE can be mixed between 0.8 fluid ounces per gallon of water to 1.6 fluid ounces per gallon of water depending on the desired dilution ratio. For most applications, use 1.6 fluid ounces of Termidor HE per gallon of water for a 0.125% dilution. For termite trenching, you will need 2 gallons of Termidor dilution to treat 10 linear feet.

For termite trenching applications, mix 1.6 fluid ounces of Termidor HE per gallon of water in a bucket up to 2 gallons. It is easier to use a 3 gallon bucket so that it will not be filled to the brim and willl help prevent spilling. To create a 2 gallon solution, you will need 3.2 fl. oz. of Termidor (1.6 fl. oz per gallon of water).

For termite trenching applications, dig a trench around the structure’s perimeter 4 inches wide and 2 inches deep. Hang on to the displaced soil as it will be used to backfill the trench after application. Because you will be applying 4 gallons of Termidor solution per 10 linear feet, it is helpful to create a dam with the soil every 10 feet of trench to section off each 10 foot stretch. Pour your finished Termidor solution in each 10 foot stretch. Then backfill by replacing the displaced soil. Be sure to pack the soil down for adequate distribution.

Termidor HE can be used to treat pre and post-construction of commercial, industrial, institutional, and residential structures and utility enclosures. It can be used on exterior surfaces, in voids, exterior crawl spaces, perimeter trenches, and under concrete slabs.

Use Termidor HE for both treatment and prevention of termites. Apply Termidor HE on calm days when rain is not in the immediate forecast. Do not treat water-saturated or frozen soil.

Termidor HE is safe to use around pets and children when applied according to label directions. Everyone should be kept off the treated area until it is completely dry. Always wear proper personal protective equipment (PPE) when applying.

It is important to properly identify the targeted termite species. Termidor HE is labelled for a variety of termites, but is not labelled to control Formosan termites.

refer to the Product Label for complete instructions including mixing rates and application techniques.