$175.00
How Advance Termite Monitoring Bases
Work
Advance Termite Monitoring Base (TMB) is a wood base placed in
the bottom of each monitoring station. The base is composed of 63
grams of preferred wood with horizontal grooves allowing for easier
access by termites and maximum wood to soil contact.
Target Pests
Subterranean Termites
Target Uses
The Advance Termite Monitoring Base is for use only in Advance
Termite Bait Stations. The wooden bases are a preferred wood for
subterranean termites and attract them to the stations for easy
monitoring and baiting.
ACTIVE INGREDIENT: None, pure wood only
Application Instructions
Use the Advance Spider Tool (purchased separately) or a flathead
screwdriver to remove the black cap from Advance Stations. Remove
the Termite Inspection Cartridge or Termite Bait Cartridge (using a
cotter pin hand tool is helpful). Remove old or damaged Termite
Monitoring Base, then replace with fresh wood base (two halves form
a complete base for each station). Re-insert or replace Monitoring
or Bait Cartridge as appropriate, then replace black cap.
Wooden Termite Monitoring Bases should be replaced once a year
or as needed if spongy, waterlogged, or moldy.
For use in the following areas:
For use in Advance Termite Bait System Stations only.
Indoors-
Not intended for indoor use.
Outdoors-
Use in Advance Termite Bait Stations installed around a
structure.
Advance Termite Monitoring Base
Features
- 63 grams of preferred wood for termite baiting
- Horizontal grooves allow easy access by termites
- Designed for maximum wood to soil contact
- Made specifically for Advance Termite Bait Stations
Extra Tips
- Replace at least once every 12 months and no less than every 15
months.
- Wood base contains no active insecticide.
- Replace wooden base more frequently if wood is soggy or
moldy.
- If termite activity has been found, wait to replace Termite
Monitoring Base until after using the Termite Bait Cartridge and
termite activity has ceased.
*Always read the Product Label completely before use.