Be the first to review this product
AIROFOG AT9 THERMAL FOGGER
In stock
SKU
AF909-000-510
Airofog thermal foggers use the pulse jet principle of igniting fuel through a tuned resonator tube that allows for continuous engine operation without any moving parts where the exhaust gasses are mixed with a diluent containing the fogging material to create a dense fog of finely atomized particles typically in the range 3-10um in size with oil based diluents for fogging of insecticides against flying insects, stored product pests, insect larvae in water surfaces and also application of biocides and disinfectants in both outdoor and indoor environments.
The professional design makes exit temperature at the point of injection to ONLY 104-140F (40-60o Celsius) with an exposure interval of under 5 milliseconds to ensure even heat sensitive materials such as biological products like Bacillus thuringiensis israelensis (Bti) or sphericus (Bts) can be applied water-based formulations.
NOT FOR SALE IN: NON U S LOCATIONS
| Size | EACH |
| Manufacturer | AIROFOG [view products, website] |
| EPA# | N / A |
| Active Ingredient | N / A |
| Label | N / A |
| SDS | N / A |
| Not For Sale To | NOT FOR SALE IN: AK, HI, PR, NON U S LOCATIONS |
FEATURES
- AiroFog Thermal Foggers use the "Pulse Jet Principle" of igniting fuel through a tuned resonator tube. This allows for continuous engine operation without any moving parts.
- Exhaust gases are mixed with a diluted product containing the material to create a dense fog of finely atomized particles.
- Particles range from 3 to 10 um in size.
- The professional design makes the exit temperature, at the point of injection, only between 40 to 60 degrees with an exposure interval of under 5 milliseconds to ensdure uniform delivery.
- Fully compliant for vector control.
FEATURES
- AiroFog Thermal Foggers use the "Pulse Jet Principle" of igniting fuel through a tuned resonator tube. This allows for continuous engine operation without any moving parts.
- Exhaust gases are mixed with a diluted product containing the material to create a dense fog of finely atomized particles.
- Particles range from 3 to 10 um in size.
- The professional design makes the exit temperature, at the point of injection, only between 40 to 60 degrees with an exposure interval of under 5 milliseconds to ensdure uniform delivery.
- Fully compliant for vector control.