Be the first to review this product
TEMP-VENT SERIES 6 1-PIECE - BROWN
In stock
SKU
TEM1BRN
Temp-Vents help to protect your foundation, which is critical to the integrity of your home. Foundation ventilation is critical as unventilated foundations are subject to built-up moisture that can eventually lead to costly damage. Temp Vent foundation vent systems help protect this critical area of the home and help control the conditions that lead to mold, mildew, fungi, damp rot, and unhealthy air.
Temp-Vent products are designed for the pest management professional. In fact, Temp-Vent is the only brand of foundation vents designed for and dedicated to serving the pest control industry. With Temp Vents' commitment and your knowledge of both termite and moisture control, customers will readily see the value of having a Temp-Vent foundation vent system installed.
For homes with problems, Temp-Vent Powered Foundation Vents are the ideal choice. Powered vents are quick, convenient and economical when it comes to helping to solve moisture, mold and odor problems.
| Size | EACH |
| Case Qty | 12 / CASE |
| Manufacturer | TEMP VENT CORP. [view products] |
| Dimensions | 7" high x 15" long x 4 7/8" deep |
| EPA# | N / A |
| Active Ingredient | N / A |
| Label | N / A |
| SDS | N / A |
| Target Pests | Helps to reduce mold, Mildew, Fungi, damp rot, and unhealthy air. |
| Use | Commercial and Residential Structures With Basements or Crawlspaces |
| Not For Sale To | NOT FOR SALE IN: AK, HI, PR, NON U S LOCATIONS |
Automatic Foundation Vents
Automatic Foundation Vents take the worry out of remembering to open and close vents as the weather changes. The vent has a bi-metal coil to open and close automatically without electricity. When the temperature reaches 70°F the vent is fully opened to provide fresh air, and fully closes at approximately 40°F to conserve energy and protect pipes.
These vents are easily installed using screws, or screw anchors and retaining clips. Both are included with the vents. No mortar is required for installation.
Temp Vent Automatic Foundation Vents feature:
* A heavy duty coil for dependable operation
* 8"x16" to fit into a standard block opening
* A net free area of 50 square inches
* The back of the vent is removable for easy cleaning and maintenance
The Series 6 vents are one piece, while the Series 5 vents have a removable front frame (in addition to the removable back) that can be snapped on after installation.
Specifying a Temp-Vent System
When you recommend Temp-Vent foundation ventilation products, you can install an automatic, non-powered foundation vent system or electrical powered ventilators.
This item is an automatic, non-powered unit.
Specifying a Temp-Vent foundation vent system is simple. All vents are sized to fit 8" x 16" openings with 1” outside frame on each of 4 sides. However, the design of the system and the number of vents required are different for powered and non-powered vents.
Automatic Foundation Vents
The non-powered, Automatic Foundation Vent will open and close automatically using a heat/cold sensitive coil. The louvers open completely at approximately 70°F and completely close at approximately 40°F. Unlike manual vents that can waste energy when no one remembers to open or close them, these vents self-adjust all year long.
To Specify:
Whenever possible, vents should be placed on all sides of the foundation. This will create an intake/exhaust system that delivers a steady flow of air. One vent should be installed for each 8 to 10 feet of foundation wall.
Most building codes require 1 square foot of open ventilation area for every 150 square feet of crawl space. Temp Vent Automatic Foundation Vents have 50 inches of net free area per vent. Therefore, you should install one vent for every 50 square feet of crawl space.
For crawl spaces with polyethylene installed, on 80-90% of the floor, the ventilation requirement changes to 1 square foot of ventilation for every 1500 square feet of crawl space with a minimum of 4 vents installed to provide cross ventilation. For crawl spaces with polyethylene, install at least one vent for every 500 square feet of crawl space.
Automatic Foundation Vents
Automatic Foundation Vents take the worry out of remembering to open and close vents as the weather changes. The vent has a bi-metal coil to open and close automatically without electricity. When the temperature reaches 70°F the vent is fully opened to provide fresh air, and fully closes at approximately 40°F to conserve energy and protect pipes.
These vents are easily installed using screws, or screw anchors and retaining clips. Both are included with the vents. No mortar is required for installation.
Temp Vent Automatic Foundation Vents feature:
* A heavy duty coil for dependable operation
* 8"x16" to fit into a standard block opening
* A net free area of 50 square inches
* The back of the vent is removable for easy cleaning and maintenance
The Series 6 vents are one piece, while the Series 5 vents have a removable front frame (in addition to the removable back) that can be snapped on after installation.
Specifying a Temp-Vent System
When you recommend Temp-Vent foundation ventilation products, you can install an automatic, non-powered foundation vent system or electrical powered ventilators.
This item is an automatic, non-powered unit.
Specifying a Temp-Vent foundation vent system is simple. All vents are sized to fit 8" x 16" openings with 1” outside frame on each of 4 sides. However, the design of the system and the number of vents required are different for powered and non-powered vents.
Automatic Foundation Vents
The non-powered, Automatic Foundation Vent will open and close automatically using a heat/cold sensitive coil. The louvers open completely at approximately 70°F and completely close at approximately 40°F. Unlike manual vents that can waste energy when no one remembers to open or close them, these vents self-adjust all year long.
To Specify:
Whenever possible, vents should be placed on all sides of the foundation. This will create an intake/exhaust system that delivers a steady flow of air. One vent should be installed for each 8 to 10 feet of foundation wall.
Most building codes require 1 square foot of open ventilation area for every 150 square feet of crawl space. Temp Vent Automatic Foundation Vents have 50 inches of net free area per vent. Therefore, you should install one vent for every 50 square feet of crawl space.
For crawl spaces with polyethylene installed, on 80-90% of the floor, the ventilation requirement changes to 1 square foot of ventilation for every 1500 square feet of crawl space with a minimum of 4 vents installed to provide cross ventilation. For crawl spaces with polyethylene, install at least one vent for every 500 square feet of crawl space.