Be the first to review this product
MOLD CLEAN GALLON
In stock
SKU
NISMOLDCLN
Mold-Clean is the perfect cleaner to apply to remove mold and mildew stains, especially before a Bora-Care application. Mold-Clean will not prevent mold, but will remove staining and discoloration.
Mold Clean does not treat or prevent mold. It is meant to remove the stains caused by mold and mildew. This product should be applied to remove the stains caused by mold first, and then you should apply Bora-Care with Mold Care to actually treat the existing mold and prevent future mold growth.
- Eliminates mold and mildew stains.
- Cleans and brightens weathered wood.
- Ready-to-use.
- Pleasantly scented.
- Contains special wetting agents and detergents.
- Penetrates deep into wood pores for thorough stain removal, which bleach cannot do.
- Minimizes or eliminates scrubbing.
- Perfect for water damage on all building materials.
| Size | GALLON |
| Case Qty | 4 / CASE |
| Manufacturer | NISUS CORPORATION [view products, website] |
| EPA# | N / A |
| Active Ingredient | Sodium Hypochlorite |
| Label | nismoldcln_mold_clean_label_08202019.pdf |
| SDS | nismoldcln_mold_clean_sds_08202019.pdf |
| Target Pests | Mold Stains, Mold Discoloration |
| Use | Residential & Commercial Indoors & Outdoors: Refer to the Product Label for a complete listing |
| Application | * See label for complete application instructions |
| Not For Sale To | NOT FOR SALE IN: AK, HI, PR, NON U S LOCATIONS |
| Yield | 1 gallon treats 150 - 200 square |
Mold-Clean presents a totally new revenue stream for your company. Mold Clean is 5 times more effective than bleach alone. Spray it on. And clean up.
Mold-Clean is the solution to remove those unsightly mold stains. Mold-Clean is not a pesticide, so it can also be sold to builders for their application.Mold-Clean At A Glance
- Can be sold directly to builders
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use.
- Pleasantly scented.
- Contains special wetting agents and detergents.
- Penetrates deep into wood pores for thorough stain removal.
- Minimizes or eliminates scrubbing.
- Perfect for decks and fences.
Mold-Clean is a stain remover only and will not kill mold spores. Should both jobs be required, use Mold-Clean to remove the stain and then apply Bora-Care with Mold-Care to kill and prevent mold. Neither cleaning or eliminating mold will stop it from reoccurring if conditions remain conducive for growth. The enemy is moisture. Permanently solving mold problems will require fixing and maintaining moisture levels in the home.
If you work with builders, Mold-Clean offers you a chance for additional revenue. Apply the product for the builder, or teach builders how to apply it and sell them Mold-Clean packaged in 1 gallon bottles. Mold-Clean creates an easy and continuous sale.
Mold-Clean can be applied directly to an affected area of a wall or any other surface with a sprayer, sponge or damp cloth to thoroughly remove mildew discoloration and stains. Follow all label directions.
Mold Clean is the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It is the only product you need to truly clean a mold stained area with out the intense smell of bleach.
Mold-Clean is a cost-effective unique technology that combines a strong oxidizing agent for color stain removal with a high pH tolerant surfactant to help wet surfaces and penetrate wood as an anti-corrosive stabilizer. In the past, people have tried to use bleach, but its EPA label does not allow this use, it is not good at wetting surfaces and it leaves behind sodium hydroxide, which is very corrosive to metal fixtures and fittings and can damage wood. EPA also does not recommend bleach, but suggests a surfactant or detergent for cleaning mold.
Mold-Clean presents a totally new revenue stream for your company. Mold Clean is 5 times more effective than bleach alone. Spray it on. And clean up.
Mold-Clean is the solution to remove those unsightly mold stains. Mold-Clean is not a pesticide, so it can also be sold to builders for their application.Mold-Clean At A Glance
- Can be sold directly to builders
- Easy to apply
- Professional grade stain remover
- Eliminates mold and mildew stains
- Cleans and brightens weathered wood
- Ready-to-use.
- Pleasantly scented.
- Contains special wetting agents and detergents.
- Penetrates deep into wood pores for thorough stain removal.
- Minimizes or eliminates scrubbing.
- Perfect for decks and fences.
Mold-Clean is a stain remover only and will not kill mold spores. Should both jobs be required, use Mold-Clean to remove the stain and then apply Bora-Care with Mold-Care to kill and prevent mold. Neither cleaning or eliminating mold will stop it from reoccurring if conditions remain conducive for growth. The enemy is moisture. Permanently solving mold problems will require fixing and maintaining moisture levels in the home.
If you work with builders, Mold-Clean offers you a chance for additional revenue. Apply the product for the builder, or teach builders how to apply it and sell them Mold-Clean packaged in 1 gallon bottles. Mold-Clean creates an easy and continuous sale.
Mold-Clean can be applied directly to an affected area of a wall or any other surface with a sprayer, sponge or damp cloth to thoroughly remove mildew discoloration and stains. Follow all label directions.
Mold Clean is the most powerful mold discoloration remover and surface conditioner available. In fact, Mold Clean is five times more effective than bleach alone. It is the only product you need to truly clean a mold stained area with out the intense smell of bleach.
Mold-Clean is a cost-effective unique technology that combines a strong oxidizing agent for color stain removal with a high pH tolerant surfactant to help wet surfaces and penetrate wood as an anti-corrosive stabilizer. In the past, people have tried to use bleach, but its EPA label does not allow this use, it is not good at wetting surfaces and it leaves behind sodium hydroxide, which is very corrosive to metal fixtures and fittings and can damage wood. EPA also does not recommend bleach, but suggests a surfactant or detergent for cleaning mold.