Be the first to review this product
MOSQUITO DUNKS 20/CARD
Out of stock
SKU
SUMMOSBRIQ20
Summit Mosquito Briquets are a sustained-release larvicide that conveniently floats right on the water surface. These briquets can be used in virtually any standing water site where mosquito larvae grow. As the briquets float, BTI (or bacillus thuringiensis israelensis, a natural mosquito-killing biocontrol agent) is slowly released at the water’s surface and gradually settles in the water where it is consumed mosquito larvae.
BTI kills mosquito larvae before they are able to grow into mature, biting adults, eventually controlling the mosquito population. Additionally, the toxin will continue to be released into the water for a period of 30 days or more, providing continuous kill. Each briquet will effectively treat up to 100 square feet of surface water regardless of depth.
NOT FOR SALE IN: CA, NON US LOCATIONS
| Size | 20 /CARD |
| Case Qty | 5 / CASE |
| Manufacturer | SUMMIT CHEMICAL [view products] |
| EPA# | 6218-47 |
| Active Ingredient | Bacillus Thuringlensis |
| Label | summosbriq20_summit_mosquito_dunks_label_10012019.pdf |
| SDS | summosbriq20_summit_mosquito_dunks_sds_10012019.pdf |
| Target Pests | Mosquitoes and Psychodid Flies, and their larvae |
| Use | Bird baths, old automobile tires, rain barrels, abandoned or unused swimming pools (particularly above ground types), tree holes, roof gutters for collecting rainwater, flower pots, animal watering troughs, elevator shafts, basements that flood, sump pumps and any drainage areas within buildings |
| Not For Sale To | CA, NON U.S. LOCATIONS |
| Yield | 1 briquet treats up to 100 sq ft of water |
Directions for Use:
Pre-flood treatment. If the briquets/dunks are applied to dry areas listed on the label which are known or suspected to become breeding sites when flooded, such as abandoned swimming pools, the briquets will float to the surface when flooding occurs and start releasing the active Bti material. Alternate wetting and drying will not reduce their effectiveness.
APPLICATION RATES
Mosquito Larvae:
Flooded larvae breeding sites: Use one (1) Summit BTI Mosquito Dunk for up to 100 sq. ft. of surface area, regardless of depth. In water with a high organic content, such as sewage disposal systems or waste lagoons, the application rate may have to be increased to as much as four (4) times the normal dosage based upon evaluation by the user.
When larval populations are high, aquatic vegetation dense, or the water highly polluted at the time of briquet/dunks use, pre-treatment with Summit Mosquito Bits® is recommended. The briquet/dunks will then suppress larval development for up to 30 days or more. Some larvae which hatch after briquet/dunks application may partially develop before dying. Allow a minimum of 48 hours for their control.
Pre-Flood treatment: Apply one (1 ) Summit Mosquito Dunk to each 100 sq. ft. of dry bed surface which is known or suspected breeding site when flooded.
Evaporative Coolers: Apply one (1) Summit Mosquito Dunk to each 100 sq. ft. of Cooler box or for smaller Coolers refer to the table below for application rate.
SAFE FOR USE IN FISH HABITATS
Outdoor Use around the Household to kill Mosquito Larvae: Summit Mosquito Dunks can be broken into portions for use in many outdoor applications near the household, such as standing water in bird baths, old automobile tires, rain barrels, abandoned or unused swimming pools (particularly above ground types), ditches, tree holes, roof gutters for collecting rainwater, flower pots, animal watering troughs or any other locations near the household where water collects and remains for periods of time. Summit Mosquito Dunks can be broken and used as shown in the following table, the amount dependent upon the surface area of water in the treatment site. Mosquito Dunks / Bti Briquets may also be used in any containerized standing water found near the home.
Preflood treatment around the Household: Apply Summit Mosquito Dunks to any dry surface listed on the label which is known to become flooded after a rain. Use the correct amount in accordance with the above dosage table.
INDOOR USE: For use in areas that collect water from time to time areas such as elevator shafts, basements that flood, sump pumps and any drainage areas within buildings. Use the correct amount in accordance with the above dosage table.
Waste WaterTreatment Plants: Place Summit Mosquito Dunks in a perforated basket, such as a minnow bait basket, and suspend the basket in the waste water stream before the water enters the trickling filter. Keep basket continuously filled with Briquets/Dunks to ensure a steady flow of Bti into the filter. The number of Briquets/Dunks needed for continuous, effective treatment in each facility will be dependent upon the volume and flow rate of the stream. This will have to be determined by the user.
These briquets/dunks may be used in all types of mosquito breeding areas. To prevent briquets/dunks from being flushed out of certain treatment sites, they can be anchored using string tied through the hole in the center or staked in place.
Pre-flood treatment. If the briquets/dunks are applied to dry areas listed on the label which are known or suspected to become breeding sites when flooded, such as abandoned swimming pools, the briquets will float to the surface when flooding occurs and start releasing the active Bti material. Alternate wetting and drying will not reduce their effectiveness.
APPLICATION RATES
Mosquito Larvae:
Flooded larvae breeding sites: Use one (1) Summit BTI Mosquito Dunk for up to 100 sq. ft. of surface area, regardless of depth. In water with a high organic content, such as sewage disposal systems or waste lagoons, the application rate may have to be increased to as much as four (4) times the normal dosage based upon evaluation by the user.
When larval populations are high, aquatic vegetation dense, or the water highly polluted at the time of briquet/dunks use, pre-treatment with Summit Mosquito Bits® is recommended. The briquet/dunks will then suppress larval development for up to 30 days or more. Some larvae which hatch after briquet/dunks application may partially develop before dying. Allow a minimum of 48 hours for their control.
Pre-Flood treatment: Apply one (1 ) Summit Mosquito Dunk to each 100 sq. ft. of dry bed surface which is known or suspected breeding site when flooded.
Evaporative Coolers: Apply one (1) Summit Mosquito Dunk to each 100 sq. ft. of Cooler box or for smaller Coolers refer to the table below for application rate.
SAFE FOR USE IN FISH HABITATS
Outdoor Use around the Household to kill Mosquito Larvae: Summit Mosquito Dunks can be broken into portions for use in many outdoor applications near the household, such as standing water in bird baths, old automobile tires, rain barrels, abandoned or unused swimming pools (particularly above ground types), ditches, tree holes, roof gutters for collecting rainwater, flower pots, animal watering troughs or any other locations near the household where water collects and remains for periods of time. Summit Mosquito Dunks can be broken and used as shown in the following table, the amount dependent upon the surface area of water in the treatment site. Mosquito Dunks / Bti Briquets may also be used in any containerized standing water found near the home.
Preflood treatment around the Household: Apply Summit Mosquito Dunks to any dry surface listed on the label which is known to become flooded after a rain. Use the correct amount in accordance with the above dosage table.
INDOOR USE: For use in areas that collect water from time to time areas such as elevator shafts, basements that flood, sump pumps and any drainage areas within buildings. Use the correct amount in accordance with the above dosage table.
Waste WaterTreatment Plants: Place Summit Mosquito Dunks in a perforated basket, such as a minnow bait basket, and suspend the basket in the waste water stream before the water enters the trickling filter. Keep basket continuously filled with Briquets/Dunks to ensure a steady flow of Bti into the filter. The number of Briquets/Dunks needed for continuous, effective treatment in each facility will be dependent upon the volume and flow rate of the stream. This will have to be determined by the user.
These briquets/dunks may be used in all types of mosquito breeding areas. To prevent briquets/dunks from being flushed out of certain treatment sites, they can be anchored using string tied through the hole in the center or staked in place.
Pre-flood treatment. If the briquets/dunks are applied to dry areas listed on the label which are known or suspected to become breeding sites when flooded, such as abandoned swimming pools, the briquets will float to the surface when flooding occurs and start releasing the active Bti material. Alternate wetting and drying will not reduce their effectiveness.
APPLICATION RATES
Mosquito Larvae:
Flooded larvae breeding sites: Use one (1) Summit BTI Mosquito Dunk for up to 100 sq. ft. of surface area, regardless of depth. In water with a high organic content, such as sewage disposal systems or waste lagoons, the application rate may have to be increased to as much as four (4) times the normal dosage based upon evaluation by the user.
When larval populations are high, aquatic vegetation dense, or the water highly polluted at the time of briquet/dunks use, pre-treatment with Summit Mosquito Bits® is recommended. The briquet/dunks will then suppress larval development for up to 30 days or more. Some larvae which hatch after briquet/dunks application may partially develop before dying. Allow a minimum of 48 hours for their control.
Pre-Flood treatment: Apply one (1 ) Summit Mosquito Dunk to each 100 sq. ft. of dry bed surface which is known or suspected breeding site when flooded.
Evaporative Coolers: Apply one (1) Summit Mosquito Dunk to each 100 sq. ft. of Cooler box or for smaller Coolers refer to the table below for application rate.
SAFE FOR USE IN FISH HABITATS
Outdoor Use around the Household to kill Mosquito Larvae: Summit Mosquito Dunks can be broken into portions for use in many outdoor applications near the household, such as standing water in bird baths, old automobile tires, rain barrels, abandoned or unused swimming pools (particularly above ground types), ditches, tree holes, roof gutters for collecting rainwater, flower pots, animal watering troughs or any other locations near the household where water collects and remains for periods of time. Summit Mosquito Dunks can be broken and used as shown in the following table, the amount dependent upon the surface area of water in the treatment site. Mosquito Dunks / Bti Briquets may also be used in any containerized standing water found near the home.
Preflood treatment around the Household: Apply Summit Mosquito Dunks to any dry surface listed on the label which is known to become flooded after a rain. Use the correct amount in accordance with the above dosage table.
INDOOR USE: For use in areas that collect water from time to time areas such as elevator shafts, basements that flood, sump pumps and any drainage areas within buildings. Use the correct amount in accordance with the above dosage table.
Waste WaterTreatment Plants: Place Summit Mosquito Dunks in a perforated basket, such as a minnow bait basket, and suspend the basket in the waste water stream before the water enters the trickling filter. Keep basket continuously filled with Briquets/Dunks to ensure a steady flow of Bti into the filter. The number of Briquets/Dunks needed for continuous, effective treatment in each facility will be dependent upon the volume and flow rate of the stream. This will have to be determined by the user.